BMS - JWBMS-6S30A - 77,5 x 26 x 5mm - 22,2 Volt 6S / 50A mit NTC

Battery-Management-System [BMS]

für 6 zellige Akkupacks [6S] - Lithium [25,2 Volt]

22,99 €

inkl. 19% MwSt. , zzgl. (kein Gefahrgut)

Stück

Battery-Management-System [BMS]

für 6 zellige Akkupacks [6S] - Lithium [25,2 Volt]

serial number	project		Test standards			unit
serial number	project		minimum	Typical value	maximum	unit
0	Overview of parameters	Rated operating voltage B-B-			30	V
		Rated discharge current		40	50	A
		Peak start current		80		A
1	Overcharge protection	The P-P-input is subject to voltage			40	V
		Charge overcurrent protection value		There are no restrictions		A
		Charge detection voltage	4.200	4.225	4.250	V
		Charging detection delay time	0.5	1	1.3	S
		Overcharge to devolt	4.000	4.005	4.050	V
2	Over-release protection	Discharge detection voltage	2.650	2.700	2.750	V
		Discharge detection delay time	20	100	150	ms
		Discharge to remove the voltage	2.85	2.95	3.05	V
		Protection release conditions	Disconnect the external load or charge self-recovery
3	Overcurrent protection	Overcurrent to detect voltage		0.1		V
		Overcurrent protects the current	20	23	25	A
		Overcurrent protection time	0.7	1	1.3	S

		Protection release conditions	Disconnect the external load or charge self-recovery
4	Short-circuit protection	Short-circuit protection current		40		A
		Detect delay time	150	250	400	μS
		Protection release conditions	Disconnect the external load or charge self-recovery
5	Resistance	The main circuit pass-through resistance		9	10	mΩ
6	Consumes current	Usually the operation consumes current		10	15	μA
7	Static current	Current is consumed during hibernation			2.5	μA
9	Operating temperature	-	-40	25	85	℃
10	Appearance size	Length, width, thickness	L60W23T5mm			mm

Batteriespannung:	22,2 Volt
Konfektionierung:	6S2P 6S1P
System:	Lithium-Ion Li-Poly
Schutzbeschaltung [BMS]:	ja
Abmessungen ( Länge × Breite × Höhe ):	6,00 × 2,30 × 0,50 cm

Es gibt noch keine Bewertungen.